Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Control Arm Bushing

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Control arm

See other generations:
Video tutorial

The failure of the bushings (silent block) of the suspension control arm is a common issue on this model: fortunately, repair kits are available that allow you to fix the problem easily and economically. Lift the vehicle on a hydraulic lift, remove the front and rear plastic protective covers, unscrew the mounting bolts of the rear control arm support, and pull it out of its seat (it may help to lubricate with spray grease).

Clean the support seat on the arm, apply grease, and insert the new support, securing it in place by tightening the corresponding mounting bolts.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing Suspension Control Arm
Replacing Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the rubber part of the bushings on the suspension control arms is a common issue on these models. You can either replace the entire co…
Replacing Front Suspension Control Arm
Replacing Front Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the bushings (or silent block) of the control arm is a common issue on this car model. To replace it, lift the vehicle on suitable jac…
How to Replace the Suspension Bushing on the BMW E46?
How to Replace the Suspension Bushing on the BMW E46?
BMW Serie 3 (1998-2006 / E46) Replacing the suspension bushing on the BMW 3 Series E46 is a straightforward task. You will need, in addition to the replacement bushing, a 16mm soc…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos