Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Side mirror

See other generations:
Video tutorial

This guide explains how to replace the outside rearview mirror of your car. By the end of this guide, you will have all the necessary information to perform this operation without any issues. First, open the car door to work comfortably.

Use a screwdriver to access the screws that hold the mirror to the car. Disconnect the connector wires and proceed to unscrew until the mirror is completely detached. Once the new mirror is installed, check that the car's seal covers the sides properly.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Glass of the Side Mirror on a BMW 3 Series
Replacing the Glass of the Side Mirror on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Here are the instructions to remove and replace the glass of the side mirror on a BMW 3 Series. First, move to the outside of the vehicle and gently …
Removing and Replacing the Outside Rearview Mirror on the BMW 3 Series
Removing and Replacing the Outside Rearview Mirror on the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) This guide will show you how to remove and replace the outside rearview mirror on the BMW 3 Series. First, open the front door and start by removing …
Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this brief guide, you will see the instructions to remove and replace the plastic cap of the outer mirror of the BMW 3 Series. First, get some pla…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos