Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel in a BMW E91?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Car door

Removing the door panel is a fairly simple operation, it just requires a bit of patience. To start, get a Torx T20 key and a plastic lever to avoid damaging anything. Begin by unscrewing the two screws: one is hidden under the armrest, which you can uncover by gently lifting the cover, while the other is near the inner handle. Then insert the lever under the panel and carefully lever to release the clips, which are quite sturdy. When the panel comes off, lift it upwards to free it from the window guide. At this point, disconnect the connectors of the speakers, buttons, and opening handle. There you go, the panel has been removed. To reassemble it, just follow the steps in reverse order.

Posted on 19 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on a BMW 3 Series
How to Remove the Rear Door Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the door panel on a BMW 3 Series. Let's look at removing the cover panel. Remove the trim plastic under the inner door handle, unscrew …
How to Remove the Door Panel of a BMW 3 Series
How to Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to remove the door panel of a BMW 3 Series. Disconnect the battery terminals located in the engine compartment. Using a screwdriver, re…
How to Remove the Door Speaker of a BMW 3 Series
How to Remove the Door Speaker of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to remove the inner speaker from the door of a BMW 3 Series? In this detailed video, you'll see how to quickly take it out from the door housing…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos