Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of the BMW 5 Series, use a tool to pry off the trim located at the top of the panel. Once this trim is removed, you can unscrew all the screws positioned underneath it. Next, detach the cover of the inner handle to loosen the screw underneath as well.

Now, proceed by prying at the bottom of the panel, detaching it from its housing, and replacing it with a new replacement part.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of the BMW 5 Series?
How to Remove the Rear Door Panel of the BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) To remove the rear door panel of the BMW 5 Series, start by removing the cover panel that hides the screw inside the internal handle area. Once this …
How to Remove and Replace the Door Panel of a BMW 5 Series
How to Remove and Replace the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…
Removing Door Panel on BMW 5 Series
Removing Door Panel on BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Remove the door cover panel on a BMW 5 Series. Start by removing the screw covers on the panel. Use a screwdriver to remove the screws located in the…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos