Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the BMW R1200R

Model: BMW BMW Various
Part: Air filter

Video tutorial

When replacing the air filter on this bike, follow the instructions in this tutorial and watch the video. To access the compartment containing the filter, you need to remove both the front and rear seats, unscrew the fixing screws of the fairing under the left side of the tank, and also remove the side panels of the fuel tank.

Then, unscrew the screws of the tank cover, and underneath you will find the housing for the filter. Simply lift the cover to extract the filter, check its cleanliness, and replace it if necessary.

Finally, reassemble all the components you have removed so far.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Where Are the Filters Located in BMWs with N47 Engine?
Where Are the Filters Located in BMWs with N47 Engine?
BMW BMW Various This video shows where all the filters are located in BMW vehicles with the N47 engine: the air filter is found under the large front grille situated…
Cleaning the MAF Sensor on a BMW Engine
Cleaning the MAF Sensor on a BMW Engine
BMW BMW Various If your BMW engine is experiencing power issues and excessive fuel consumption, the cause may be a dirty MAF sensor that is not communicating properl…
How to Reset the Service Light on a BMW
How to Reset the Service Light on a BMW
BMW BMW Various Performing the reset of the TPMS light related to tyre pressure on BMW vehicles is a simple and quick operation that can be done independently. It is…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos