Do it yourself
Frequently asked questions about cars and motorcycles

Where Are the Filters Located in BMWs with N47 Engine?

Model: BMW BMW Various
Part: Checks and maintenance

This video shows where all the filters are located in BMW vehicles with the N47 engine: the air filter is found under the large front grille situated right in front of the engine block; to remove it, simply unclip the two clips at the front, then there are three at the back, and lift the cover. The YouTuber rightly recommends that when changing the filter, it should be thoroughly cleaned with a vacuum, including the housing for dust and debris; avoid using compressed air as it spreads dust throughout the engine. It is also noted that the oil dipstick is indeed present, although hidden, at the top of the engine block. On the left side under the windscreen, you can find the cabin air filter: there are three screws, which when removed, allow you to pull it out. The diesel filter is located underneath the vehicle; it is necessary to lift it, remove the plastic cover, and you will find this sort of canister which is the filter. The cabin filter is located inside, under the glove compartment.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW BMW Various To replace the timing chain of the BMW N47 engine, loosen the bolts securing the side panel so that it can be completely removed. Once the panel is d…
BMW BMW Various In order to replace the timing chain of the BMW N47 engine, you need to access the side of the engine block, so that you can loosen the covering pane…
BMW BMW Various This video explains how the BMW N47 engine works, a type of engine that brings much joy to its owner, but also many troubles due to its complexity an…

Other guides you may be interested in

    Frequently Asked Questions

    • Bmw Vari - What does the term BMW X Line mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos