Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Checking Tyre Pressure

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Checks and maintenance

Before embarking on a journey or perhaps when refuelling, it is advisable to check the inflation pressure of the tyres; this value depends on the size of the tyres and the load conditions of the vehicle. That said, check the tyre size by reading the sidewall (it is not guaranteed that the front and rear tyres are the same, so check both) and based on this, verify the inflation pressure value indicated on the label affixed to the driver’s door pillar, which provides some reference values.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light
Resetting the Tyre Pressure Warning Light
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Whenever you check the inflation pressure of the tyres, the tyre pressure warning light may illuminate on the dashboard; resetting this light is done…
How to reset the tire pressure light on a BMW 1 Series?
How to reset the tire pressure light on a BMW 1 Series?
BMW Serie 1 (2019-2026 / MK 3, F40) To reset the tire pressure warning light on a BMW 1 Series, turn on the instrument panel without starting the engine. Use the rotary controller locat…
Reset Tyre Pressure Warning Light on BMW 1 Series F20
Reset Tyre Pressure Warning Light on BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) This brief guide explains how to reset the tyre pressure warning light on a 2011 BMW 1 Series F20. Ensure all four tyres are inflated to the recommen…

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos