Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of the BMW X1?

Model: BMW X1 E84 - Years 2009-2015
Part: Front bumper

To remove the front bumper of the BMW X1, open the hood to access the screws securing the bumper from the top. Once these screws are loosened, detach the rivets located inside the wheel wells to remove the trim pieces. Next, unscrew the bolts under the trim and those located at the bottom of the bumper to completely remove it. This will allow you to install the new replacement part.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X1 (2015-2022 / F48) To remove the front bumper from the BMW X1, open the hood to access the screws that secure the bumper from the top. Once these screws are loosened, y…
BMW X1 (2015-2022 / F48) To remove the front bumper on a BMW X1, open the hood to access the screws securing the component from the top. Once these screws are loosened, you c…
BMW X1 (2009-2015 / E84) Before you begin, open the hood of your BMW X1. Start by removing the screws that secure the bumper, located around the perimeter. Then, unclip and m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos