Do it yourself
| ||||
|
BMW X1 - Video tutorial
Model: BMW X1
F48
- Years 2015-2022 The removal of the front bumper on the BMW X1 is done by opening the hood, so that you have access to the screws that secure the component from its top. Once these screws have been loosened, it will be possible to detach the moldings located inside the front wheel arches. Under these moldings, additional screws can be found that secure the bumper. When these screws have also been unscrewed, it will be possible to completely detach the bumper so that the new one can be inserted: this must be properly fixed to its housing.
Posted on 9 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |