Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate or Deactivate Traction Control on the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Checks and maintenance

This guide briefly outlines the steps to activate and deactivate traction control on the BMW X1; remember that deactivating traction control may compromise driver safety and vehicle handling. So, get in the vehicle and start the engine; you will find the traction control button on the center console, next to the gear lever; press it to deactivate (it is usually active). This will indicate that traction control is deactivated; press the button again to activate it!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Start&Stop on the BMW X1?
How to Disable the Start&Stop on the BMW X1?
BMW X1 (2022-2026 / U11) You can disable the Start&Stop feature on the BMW X1 by turning on the instrument cluster and pressing the button with the car icon located on the ri…
How to Disable the START&STOP System on the BMW X1
How to Disable the START&STOP System on the BMW X1
BMW X1 (2015-2022 / F48) Today, I will explain how to disable the START&STOP system on a BMW X1 vehicle. Turn on the instrument cluster and the vehicle's onboard computer, th…
How to Activate Automatic Folding Mirrors in the BMW X1?
How to Activate Automatic Folding Mirrors in the BMW X1?
BMW X1 (2015-2022 / F48) In this tutorial, you will see how to activate the automatic folding of the exterior mirrors in the BMW X1, allowing you to park your car without the…

    Frequently Asked Questions

    • X1 2023-2030 - Where is the spare wheel on the BMW X1 located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos