Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Turn Signal

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Light bulb

Replacing the front turn signal, the one next to the headlight, is simple since it does not require removing any other components; open the hood and locate the first hole on the edge of the fender, near the closing line, right in front of the mounting pin; insert a Phillips screwdriver through this hole to loosen the mounting nut of the turn signal and pull it forward enough to disconnect the wiring harness; installation is the reverse, connect the harness and insert the turn signal so that the plastic fork aligns with the mounting nut, then tighten the screw.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing Front Turn Signal
Instructions for Removing Front Turn Signal
BMW Serie 7 (1986-1994 / MK 2, E32, E38, MK 3) As with all older cars, removing the front turn signal is quick and intuitive. You don’t need to disassemble anything else besides the headlamp itsel…
Instructions for Replacing the Front Headlight
Instructions for Replacing the Front Headlight
BMW Serie 7 (1986-1994 / MK 2, E32, E38, MK 3) If the headlight is broken, before proceeding with disassembly, remove any glass remnants. Then, unscrew the mounting screws located at the top of th…
Front Bumper Removal Instructions
Front Bumper Removal Instructions
BMW Serie 7 (1986-1994 / MK 2, E32, E38, MK 3) To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at t…

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos