Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in the BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Blower motor

In this tutorial, see how to replace the cabin fan in the BMW 1 Series F20. First, ensure the key is not inserted, then go under the dashboard on the passenger side and remove the two bolts indicated using a 10mm socket. Once the panel is removed, locate the fan in question, disconnect the power connector using a flathead screwdriver, and unscrew the three fixing screws with a Torx T20 key. Once done, you can extract the fan from the housing and fit the replacement.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Fan on BMW 1 Series
How to Remove the Air Fan on BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Is the air fan in need of replacement? Here’s how to remove it from inside a BMW 1 Series vehicle. Use a lever to remove the plastic under the front …
How to Replace the Cabin Filter in a BMW 1 Series?
How to Replace the Cabin Filter in a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this tutorial, you will learn how to replace the cabin filter in a BMW 1 Series, a very simple and quick operation. Start by positioning yourself …
Replacing the Auxiliary Belt of the BMW 1 Series 120d
Replacing the Auxiliary Belt of the BMW 1 Series 120d
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide provides instructions for removing and replacing the auxiliary belt of the BMW 1 Series 120d. First, open the engine bonnet and remove the…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - Why is the interior fan of the BMW 1 Series not working? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos