Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to replace the cabin filter in the BMW Series 1?

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 F20, F21, MK 2 - Years 2011-2019
Part: Cabin air filter
Operation: How to replace the cabin filter in the BMW Series 1?

In this tutorial, we can see how to replace the cabin filter in the BMW Series 1, an extremely simple and fast operation. Let's start by positioning ourselves on the passenger seat, then unscrew the two bolts located under the glove compartment and remove the protective panel. Next, we locate the long rectangular door, open it by unscrewing the corresponding fastening screws, and remove the old filter from the housing. At this point, all that remains is to clean any dirt residue, insert the replacement, and follow the reverse procedure to reassemble everything.


Posted on 28 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 1 2019-2026 - Where is the cabin filter located in the BMW 1 Series? Read Answer
    • Serie 1 2004-2013 - Where is the particulate filter of a BMW 1 Series located? Read Answer
    • Serie 1 2011-2019 - Where is the pollen filter located on BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - Where is the pollen filter of the BMW 1 Series f20 located? Read Answer
    • Serie 1 2011-2019 - Where is the cabin filter of the BMW 1 Series F20? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos