Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to perform a complete service on the BMW 1 series 118d

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 F20, F21, MK 2 - Years 2011-2019
Part: Checks and maintenance
Operation: How to perform a complete service on the BMW 1 series 118d

In this video tutorial we can see how to perform a complete service on the BMW 1 series 118d. The first thing to do is buy: a cabin filter, an air filter, a diesel filter, an oil filter and the engine oil suitable for this type of vehicle: 5 liters SAE 5W-30 (see the specifications in the use and maintenance manual). Jack the car up with a hydraulic jack and put jack stands and a tire underneath for safety. Using a 17 spanner, remove the sump plug, place a basin underneath to collect the used oil and wait for all the oil to flow inside. In the engine compartment we go to remove the oil filter, with a jack wrench with a 27 socket; once the old oil filter has been removed, fit the new one, then tighten the oil container, with a torque wrench tightening to 25Nm. Now we have to replace the diesel filter, then disassemble the filter cover which is made up of 8 screws; once the cover has been unhooked, let's remove the diesel filter with a 13 wrench and replace it with the new one together with the new gasket. Finally, put the oil pan cap back on and top up 5 litres. The oil through the funnel. Bleed the diesel filter simply by entering the car and starting the engine. Replace the air and cabin filter.


Posted on 25 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 1 2011-2019 - How much does it cost to replace the timing chain on a BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What does the tire pressure warning light on the BMW 1 Series indicate? Read Answer
    • Serie 1 2004-2013 - What does the tire pressure indicator light on the BMW 1 Series indicate? Read Answer
    • Serie 1 2011-2019 - What are the indicators of the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What are the dashboard indicators on the BMW 1 Series? Read Answer
    • Serie 1 2004-2013 - Why won't the fuel tank flap of the BMW 1 Series E81 close? Read Answer
    • Serie 1 2011-2019 - Why did the engine malfunction light turn on in the BMW Series 1? Read Answer
    • Serie 1 2011-2019 - Bmw Serie 1 f20, what is the most frequent problem? Read Answer
    • Serie 1 2011-2019 - What problems can a BMW 1 Series have when starting? Read Answer
    • Serie 1 2004-2013 - What problems does the BMW 1 Series have when starting? Read Answer
    • Serie 1 2004-2013 - What warning lights are there, in the BMW E87? Read Answer
    • Serie 1 2011-2019 - Where is the BMW 1 Series outside temperature sensor located? Read Answer
    • Serie 1 2004-2013 - What are the BMW 1 Series warning lights? Read Answer
    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read Answer
    • Serie 1 2011-2019 - What is the emergency call system fault in the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What are the main problems of the BMW 120d F20? Read Answer
    • Serie 1 2019-2026 - Why is the tailgate on my BMW 1 Series stuck? Read Answer
    • Serie 1 2011-2019 - Why is the engine failure warning light on in the BMW 1 Series? Read Answer
    • Serie 1 2004-2013 - What does the warning light with a steering wheel and an exclamation mark mean in the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What does the message "Full power of the powertrain not available" mean in the BMW 1 Series? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos