Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on a BMW 1 Series E87

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

To change the air filter located in the engine compartment of your BMW 1 Series E87, carefully read the following mini-guide and follow the instructions. First, ensure the car is completely off and the engine is sufficiently cool.

Then, open the bonnet and locate the entire filter block on the right side. Unscrew all the screws holding the block in place and disconnect the connector to remove it completely.

At this point, access the old air filter and replace it with a new one. Finally, reposition the entire block correctly, re-screw the screws, and reconnect the electrical connector.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Replacing Air Filter in BMW 1 Series
Replacing Air Filter in BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, follow these simple steps to replace the engine air filter in a BMW 1 Series. First, open the bonnet and use a flat screwdriver to remove the …
How to Replace the Air Filter on a BMW 1 Series
How to Replace the Air Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Let's see how to replace the engine air filter on a BMW 1 Series: open the car door, pull up the engine compartment release lever located at the bott…
How to Replace the Pollen Filter on a BMW 1 Series
How to Replace the Pollen Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) How do you replace the cabin air filter (pollen filter) on a BMW 1 Series? This video shows you how to disassemble it. Remove the screws securing the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos