Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the services on the BMW E46.

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

To reset the warning lights on a BMW E46, you need to follow this procedure: turn off the car, once the car is off, press and hold the reset button located to the left of the instrument panel. While holding the button, turn the key to position 1 and hold the button for 5 seconds until the service message appears. When the service message appears, release and press the button again until the flashing RESET message appears. At this point, release the button and press it again when the message reappears during the flashing.

Posted on 26 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Reset of the service warning light on BMW 3 Series e46
Reset of the service warning light on BMW 3 Series e46
BMW Serie 3 (1998-2006 / E46) Resetting the service warning light on BMW 3 Series E46 is very simple, and now we will explain how to do it. Insert the special ignition key without…
How to reset the brake light on a BMW 3 Series vehicle.
How to reset the brake light on a BMW 3 Series vehicle.
BMW Serie 3 (1998-2006 / E46) Resetting the brake warning light, related to brake pad wear or taste, is a very important operation to perform, and we remind you that, like other r…
How to reset the service light on the BMW 3 Series
How to reset the service light on the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today we will explain how to reset the service light on a BMW 3 Series model E46. Turn on the vehicle's instrument panel and press the trip button, l…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2012-2019 - Where is the paint code of the BMW 3 series 320d located? Read answer

How to Replace the Interior Rearview Mirror on an Audi Q5

In this simple operation, follow a few straightforward steps to replace the mirror without damaging any sensitive parts of your vehicle. Start by removing the small panel that covers the pillar connecting the roof of your vehicle to the mirror. Then, using a lever, remove the lower cover. Now, simply rotate the mirror to remove it; you can use a wrench to assist with the rotation. Once the mirror is removed, install the new one by following the steps in reverse for reassembly.

Watch the video!


by ScegliAuto

More videos