Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Light on a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

Resetting the brake light, which indicates wear or issues with the brake pads, is a very important operation. Remember that this, like other reset operations, should only be performed after completing all maintenance tasks. In today's video, you will learn how to reset the brake light on a BMW 3 Series model E46. To reset the light, turn on the ignition and wait 25 seconds. Then, turn the ignition on and off about 5 times while pressing the brake pedal. By doing this, you will have reset the brake light.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Brake Light on BMW 3 Series E46
Reset Brake Light on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) .. In this video tutorial, you will learn how to reset the brake light on a BMW 3 Series E46 in simple steps; the procedure is very easy and does.. …
How to Reset the Brake Pad Warning Light on a BMW 3 Series
How to Reset the Brake Pad Warning Light on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Follow these instructions to reset the brake pad wear warning light on a BMW 3 Series. After replacing the old brake pads, get in the vehicle and tur…
Reset Brake Light on BMW 3 Series
Reset Brake Light on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Reset the brake light on a BMW 3 Series? Let's see how to reset the light. Turn on the ignition and check that the brake light is illuminated. Turn o…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos