Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Brake Light on BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

Reset the brake light on a BMW 3 Series? Let's see how to reset the light. Turn on the ignition and check that the brake light is illuminated. Turn off the ignition and press the brake pedal multiple times to ensure the brake pads are properly seated against the rotors. Turn on the ignition and hold the brake pedal down firmly for 30 seconds. Once you achieve sufficient brake fluid pressure, the light should turn off. Make sure the brake fluid level in the reservoir is at the maximum. Repeat the maintenance if you were unable to reset it on the first attempt.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Light on a BMW 3 Series
How to Reset the Brake Light on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Resetting the brake light, which indicates wear or issues with the brake pads, is a very important operation. Remember that this, like other reset op…
How to Reset the "Brake Pad" Light on a BMW 3 Series
How to Reset the "Brake Pad" Light on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the hood of your BMW 3 Series. Next, activate the instrument cluster without starting the engine. Then, press and hold the lef…
How to Reset the Brake Pad Warning Light on a BMW 3 Series
How to Reset the Brake Pad Warning Light on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Follow these instructions to reset the brake pad wear warning light on a BMW 3 Series. After replacing the old brake pads, get in the vehicle and tur…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos