Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of low beam headlight on BMW GS 800.

Model: BMW BMW Various
Part: Headlight bulb

If we need to replace the headlight bulb on this model of motorcycle, in the description provided below we will find all the necessary indications and steps to follow. After removing the front fairing located under the instrument panel, we will have access to the back area of the headlight. We then proceed to remove the plastic cover at the back and disconnect the electrical power connector of the lamp and release the steel clip that secures it. Then, remove the lamp and replace it with the new one, position it, reattach the steel grille, then reconnect the electrical power connector and reposition the plastic cover.

Posted on 9 May 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the gear knob on BMW cars
Replacement of the gear knob on BMW cars
BMW BMW Various As you can see in the video, replacing a gear knob on a BMW car does not usually require any particular procedure, being it only stuck in the lever t…
How to replace the timing belt of the BMW Mini N47.
How to replace the timing belt of the BMW Mini N47.
BMW BMW Various The replacement of the timing belt of a BMW Mini vehicle is the same for all other vehicles produced by the parent company. This operation is a bit c…
How to reset AdBlue on BMW?
How to reset AdBlue on BMW?
BMW BMW Various When we notice that the blue low level warning light on the car comes on, it means that it is necessary to top up the anti-pollution additive whose t…

Other guides you may be interested in

How to Remove the Oil Filter on a Toyota Yaris

How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack. After removing the cover panel (if present), use a socket spanner to unscrew the oil filter holder. Allow the oil to drain into a container for disposal. Remove the dirty and worn filter from the metal container; clean the container and insert a new filter. Screw the filter holder back into its designated housing using the appropriate spanner and lower the car once the job is complete.

Watch the video!


by ScegliAuto

More videos