Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing chain on the BMW 1 Series?

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain on the BMW 1 Series, loosen the screws that secure the plastic cover located at the front of the engine block: once this is removed, you will be able to locate the camshaft sprockets and the chain tensioners. These can be removed from their housing by loosening the screws that secure them: this will allow the chain to reduce its tension, enabling removal.

After the chain has been removed from its seat, you can insert the new one, reinstalling the chain tensioners and covering everything with the appropriate panels.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW 1 Series 118i
Replacing the Timing Chain on the BMW 1 Series 118i
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Below are the main instructions for removing and replacing the timing chain on the BMW 1 Series 118i. First, open the bonnet of your car and start by…
Guide to Replacing the Timing Chain on a BMW 1 Series 1.6
Guide to Replacing the Timing Chain on a BMW 1 Series 1.6
BMW Serie 1 (2011-2019 / F21, MK 2, F20) Today's instructions will show you how to remove and replace the timing chain on a BMW 1 Series 1.6, engine code N13 B16A. First, open the bonnet of …
How to Replace the Timing Chain on a BMW 1 Series?
How to Replace the Timing Chain on a BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To replace the timing chain on a BMW 1 Series, open the bonnet to access the components inside the engine bay. You will need to loosen the bolts secu…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos