Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Mass Airflow Sensor Operating Parameters

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
Video tutorial

The mass airflow sensor provides the engine control unit with information regarding the volume of air drawn in based on the throttle position. The control unit must adjust the fuel volume injected to ensure proper power delivery.

It is clear that incorrect information from this sensor will lead to inaccurate fuel injection values, negatively impacting performance and fuel economy. To check the proper functioning of the mass airflow sensor, you need to be somewhat familiar with using a multimeter, as you will measure resistance values and output voltage from the sensor based on the throttle position, powering the sensor with a 9-volt battery.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Cleaning the Mass Air Flow Sensor
Cleaning the Mass Air Flow Sensor
BMW Serie 5 (1995-2003 / E39) The mass air flow (MAF) sensor, commonly known as the air flow meter, is located along the intake duct, just behind the engine air filter housing. To…
Replacing Engine Mass Airflow Sensor
Replacing Engine Mass Airflow Sensor
BMW Serie 5 (1995-2003 / E39) Lift the hood and turn on the ignition of your vehicle. Use a multimeter to test the connectors of the mass airflow sensor. Next, remove the clamps s…
Checking Throttle Position Sensor
Checking Throttle Position Sensor
BMW Serie 5 (1995-2003 / E39) At the entrance of the intake manifold is the so-called throttle body: it is a valve equipped with a butterfly that regulates the airflow in the inta…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos