Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Wheel Well Liner

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Body

See other generations:
Video tutorial

Removing the wheel well liner is very straightforward, but to facilitate the removal, it is recommended to lift the vehicle on a suitable car jack and also remove the front wheel; once the wheel is off, proceed to remove the clips and screws securing the wheel well liner: to extract the push clips along the edge, first press the center pin inward to release the rear fastening and pull out the clip; after removing all clips and screws, complete the removal of the wheel well liner from its location.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
BMW Serie 3 (1998-2006 / E46) Before starting the removal of the rear bumper, it is recommended to lift the vehicle on proper jack stands and remove the rear wheels, and also to o…
Replacing the Outside Temperature Sensor of the BMW 3 Series
Replacing the Outside Temperature Sensor of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Here’s how to remove and replace the outside temperature sensor on the BMW 3 Series. First, lift the vehicle and begin removing the lower engine cove…
Instructions for Disassembling the Drive Shaft
Instructions for Disassembling the Drive Shaft
BMW Serie 3 (1998-2006 / E46) To disassemble the drive shaft, lift the vehicle on a lift and first remove the exhaust pipe. Once the muffler is removed, take off the heat shield t…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos