Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Key

Replacing the key fob battery for the BMW 3 Series E46, as shown in this tutorial, is a very simple task. For this, you will need a small flathead screwdriver, a utility knife, and a replacement CR2020 battery. First, locate the slot on the bottom edge of the key fob, then insert the screwdriver into it and pry apart the two halves. Next, remove the circuit board and detach the contact using the utility knife, being careful not to damage it. Then, insert the replacement battery in the correct orientation and reassemble everything.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the BMW 3 Series Key Fob Battery
How to Replace the BMW 3 Series Key Fob Battery
BMW Serie 3 (2005-2013 / E91, E90, E92) In a few simple steps, we will see the instructions that will allow you to disassemble and replace the battery of the BMW 3 Series key fob. First, ta…
How to Open the BMW 3 Remote Key
How to Open the BMW 3 Remote Key
BMW Serie 3 (1998-2006 / E46) Need to replace the remote key for your BMW 3 Series? Let's go through the disassembly. Take your remote key and use a screwdriver to pry between the…
Replacement of the battery for the BMW Series 3 key remote.
Replacement of the battery for the BMW Series 3 key remote.
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's discover in this guide the instructions that will allow us to disassemble and replace the battery of the BMW Series 3 key remote. First, let's …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos