Do it yourself
| ||||
|
BMW Serie 5 - Video tutorial
Model: BMW Serie 5
E61, E60
- Years 2003-2010 Many electronic systems on board the car can lose some memorization if the battery is disconnected, from the simple clock to the radio unlock code; there is the possibility of disconnecting and then replacing the battery without having to enter any code or perform any memorization; while the battery is housed in the luggage compartment, in the engine compartment there are two return poles to which a booster or a buffer battery can be connected with the appropriate cables in order to leave the car's electrical system always powered on during disassembly of the battery; once this precaution has been implemented, the battery can be replaced by removing the loading surface and the side cover to access the battery compartment, remove the battery fixing brackets, disconnect the poles and extract the old battery to install the new one; once the poles have been reconnected, the return poles can be disconnected.
Posted on 2 September 2023 by ScegliAuto
Where is the serial number in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this video we can see where the serial number, also known as the "VIN" code, is located in the BMW 5 Series, useful for example in case we need to
How to remove the "service engine soon" light on the BMW 5 Series.
BMW Serie 5 (2003-2010 / E61, E60) To remove the "Service Engine Soon" light in the BMW 5 Series, follow these steps: Turn on the car and wait for the "Service Engine Soon" light to il
Replacement of washer fluid tank rubbers
BMW Serie 5 (1995-2003 / E39) If fluid leaks are noticed in the rear area of the right front wheel (passenger side), then it is likely that the washer fluid reservoir has leaked; Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |