Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Speaker Removal Instructions

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Speaker

To remove the front speaker, you need to take off the door panel. First, detach the trim piece in the center of the panel to access the screws underneath. Unscrew the screws and release the clips along the edges. Then, pull the panel away enough to disconnect the lock cable, the speaker connector, and the window switch connector. Once the panel is removed, you can finish removing the speaker by unscrewing the four mounting screws.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front door speaker on a BMW 3 Series
How to replace the front door speaker on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before we can start, we will have to open the front door of our BMW 3 Series. Let's start by disassembling and removing the door panel, disengaging a…
Replacement of the dashboard speaker of the BMW 3 Series
Replacement of the dashboard speaker of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) The steps outlined in this guide will show us how to disassemble and replace the dashboard speaker of the BMW 3 Series. First, we get into the car an…
How to replace the front door speaker on a BMW 3 Series
How to replace the front door speaker on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before we can start, we will have to go to open the door of our BMW 3 Series. Let's start by disengaging and removing the door panel inserts, using a…

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos