Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the instrument panel lights of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Instrument panel light

This short guide will show us how to disassemble and replace the bulbs of the instrument panel of the BMW 3 Series, following the instructions below. First, we get inside the cabin and start disassembling and removing the instrument panel; to do this, simply unscrew the fastening screws found on the top, then disconnect the electrical connector located on the back, as shown in the video. At this point, we remove the plastic cover to access the electronic board and the lights of the instrument panel, replacing the bulb bulbs with the new ones!

Posted on 5 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Bmw 3 Series instrument cluster warning lights reset
Bmw 3 Series instrument cluster warning lights reset
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial we will see the instructions to reset the warning lights that come on on the instrument panel of a BMW 3 Series (which can be …
How to find out the fuse diagram of a BMW Series 3
How to find out the fuse diagram of a BMW Series 3
BMW Serie 3 (1998-2006 / E46) The selected video shows the diagrams related to the fuse boxes present in a BMW Series 3 car. The fuse panels are located inside the vehicle's cabin…
How to replace the dashboard lights in the BMW 3 Series?
How to replace the dashboard lights in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial we can see how to replace the dashboard light bulbs in the BMW 3 Series E90, E91 and E92. First of all we disassemble the steering w…

How to Change the Brake Pads on a Volkswagen New Beetle

Learn how to change the front brake pads on a Volkswagen New Beetle. First, lift the car on a column lift to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) along with the respective bolts. Unscrew the locking bolt of the brake caliper, remove it from the wheel hub support, and detach the pads from the brake caliper using a screwdriver. Install the new pads on the brake caliper and refit the brake caliper to the support; tighten all bolts and remount the wheel. Proceed to perform the same operations on the other calipers present on the vehicle.

Watch the video!


by ScegliAuto

More videos