Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Dashboard Lights in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument panel light

See other generations:
Video tutorial

In this tutorial, see how to replace the dashboard light bulbs in the BMW 3 Series E90, E91, and E92. First, remove the steering wheel, then unscrew the three screws along the perimeter of the dashboard using a Torx T10 wrench. Once done, pull the cluster from the housing and disconnect the rear connectors.

At this point, unlock the cluster by releasing the 6 clips, using a plastic spatula. To remove a light, desolder it from the circuit, and follow the reverse procedure to reassemble everything.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Switch Knob of a BMW 3 Series
How to Remove the Headlight Switch Knob of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove the headlight switch knob of a BMW 3 Series? Let's carefully see in this video how to properly disassemble the part. Remove the plastic…
How to Remove the Switches of a BMW 3 Series
How to Remove the Switches of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Carefully watch the video on removing the light switch of a BMW 3 Series. Use a trim tool to pry off the trim piece located at the top of the dashboa…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2019-2026 / G20) In the BMW 3 Series, all fuses are contained in the fuse boxes installed in the vehicle: in this type of car, you can find two boxes. The first is lo…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos