Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Switch Knob of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Push button

How to remove the headlight switch knob of a BMW 3 Series? Let's carefully see in this video how to properly disassemble the part. Remove the plastic cover from the left air vent, detach it from the dashboard, then use a lever to remove the light knob and pull the piece out from the dashboard. Disconnect the power connector. Once the piece is removed, install a new one or repair the light knob and reassemble the same one. Finally, proceed in reverse for the assembly operations. First, install the light knob and then the air vent.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure of the BMW 3 Series
How to reset the tire pressure of the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) To reset the tire pressure warning light on the BMW 3 Series, we check the pressure of all 4 tires to ensure it is correct according to the manufactu…
How to find out the fuse diagram of a BMW Series 3
How to find out the fuse diagram of a BMW Series 3
BMW Serie 3 (1998-2006 / E46) The selected video shows the diagrams related to the fuse boxes present in a BMW Series 3 car. The fuse panels are located inside the vehicle's cabin…
How to Remove the Center Console Trim Panel on a BMW 3 Series
How to Remove the Center Console Trim Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to remove the center console trim panel on a BMW 3 Series. Position the gear shift knob vertically, then use a plastic pry tool to remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos