Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Happens if the Injection Pump Fails (on Audi and BMW)

Model: BMW BMW Various
Part: Pump

Video tutorial

If the injection pump fails, it often does not give any warning, as when it starts to fail, it continues to function until metal shavings begin to damage the injectors; only then does the control unit notice, but at that point, a tow truck is necessary, and the repair is very costly as all components that may have been contaminated by the metal shavings must be replaced.

The video indicates a structural defect in the design of these pumps, which can cause this metal shavings issue.

This company offers an innovatively shaped pump, guaranteed for 10 years, which can reassure you at least for this particular when it comes time for replacement. You can find all the information you need on garanziamec.com.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a BMW
How to Replace the Fuel Pump on a BMW
BMW BMW Various In this task, it is essential to work safely. Therefore, the first step is to disconnect the battery cables to locate the pump, which is situated in …
Changing the three chains of a BMW N47 engine without removing the engine is not possible
Changing the three chains of a BMW N47 engine without removing the engine is not possible
BMW BMW Various This video shows how it is impossible to do a good job changing the three timing chains of a BMW N47 engine without removing it from its mounting. No…
Removing the Air Conditioning Compressor from BMW, Audi, Mercedes
Removing the Air Conditioning Compressor from BMW, Audi, Mercedes
BMW BMW Various In this video tutorial, you will learn how to remove the air conditioning compressor from various models of BMW, Audi, and Mercedes. First, access th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos