Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radiator Fan

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Radiator

Open the hood of the engine compartment and locate the position of the radiator fan, which is at the front just behind the radiator itself. Using two suitable wrenches, use one to hold the fan's locking mechanism and with the other, turn clockwise until you unlock the mechanism. At this point, the fan is disengaged and can be removed from its housing. Now you can install a new fan or, after any necessary maintenance, reinstall the same fan. The car on which this maintenance operation was performed is a BMW 3 Series.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removal and Cleaning of the ICV Sensor
Removal and Cleaning of the ICV Sensor
BMW Serie 3 (1998-2006 / E46) The ICV (Idle Control Valve) is essentially a sensor that controls the throttle opening when there is low flow, typically below about 20% of the gas,…
Thermostat Removal and Replacement
Thermostat Removal and Replacement
BMW Serie 3 (1998-2006 / E46) This video shows how to remove and replace the thermostat. First, locate the thermostat housing. Once identified, you can begin its removal and repla…
How to remove the roof sky of the BMW 3 Series
How to remove the roof sky of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these brief instructions, we will see how to dismantle and replace the headliner or interior roof lining of the BMW 3 Series. First of all,…

Other guides you may be interested in

How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan

Here’s how to remove and install the external wing mirror on a Volkswagen Tiguan (passenger side). After removing the door panel: disconnect the battery terminals, unscrew the fastening pins of the mirror using the appropriate socket. Once the fastening pins are removed: take out the mirror with the electric adjustment wires from the car door. To reassemble: refit the mirror with the pins, the electric adjustment wires, and the plastic panel of the door. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos