Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Hydraulic Pistons

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Hydraulic pistons

Hydraulic pistons operate based on oil pressure, moving the brake pads closer or further from the rotor. This guide shows the equipment and procedures for the care and maintenance of hydraulic pistons. Hydraulic pistons at rest are supported within the brake housing, allowing the pads to remain well spaced. The movement and function of the pistons are not always perfect. To proceed, you will need an Allen wrench to secure the brake housing to the frame and a cloth with spray to clean and lubricate the pistons.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the hydraulic pistons of the rear trunk lid of a BMW 5 Series
How to replace the hydraulic pistons of the rear trunk lid of a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Before starting, we will have to open the tailgate of the luggage compartment of our BMW 5 Series. Let's start by unhooking the hooks that secure the…
Check Hydraulic Actuation Systems
Check Hydraulic Actuation Systems
BMW Serie 5 (1995-2003 / E39) The vehicle's engine is equipped with several hydraulic actuation systems (such as valve lift) that utilize engine oil pressure to operate. Wear on t…
Brake Fluid Replacement Instructions
Brake Fluid Replacement Instructions
BMW Serie 5 (1995-2003 / E39) Brake fluid, incorrectly referred to as brake oil, is essential for hydraulic braking systems, allowing the brake mechanism to operate without compre…

Other guides you may be interested in

How to Remove the Interior Handle of a BMW 3 Series

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.

Watch the video!


by ScegliAuto

More videos