Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for the BMW 5 Series?

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Key

In this tutorial, you will see how to program a new remote for the BMW 5 Series, a very simple and quick operation. To do this, you will obviously need a working key; otherwise, you will need to visit an authorized dealership. First, enter the cabin using the working key, then close the doors, insert the new key, and turn the ignition on and off. Next, press and hold the unlock button, then press the lock button three times in a row, and test the remote's functionality.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to program the key remote for the BMW 5 Series
How to program the key remote for the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Today's instructions will allow us to program the remote control key of the BMW 5 Series, in simple and quick steps. First, we get into the car with …
Replacing the Key Battery on BMW Cars
Replacing the Key Battery on BMW Cars
BMW Serie 5 (2017-2024 / G30) To replace the batteries in this BMW key, used on models such as the BMW 5 Series, 6 Series, 7 Series, and X3, simply get a flathead screwdriver and …
How to Replace the Remote Battery for the BMW 5 Series?
How to Replace the Remote Battery for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To replace the battery in the BMW 5 Series remote, press the button located on the top of the remote to fully extract the key inside the device. Afte…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos