Do it yourself
Frequently asked questions about cars and motorcycles

Changing Automatic Transmission Fluid with Flush

Model: BMW X5 E53 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Transmission fluid

See other generations:
Video tutorial

Lift the vehicle on a lift. Unscrew the oil plug located on the transmission pan and let it drain into a suitable container.

Add the flushing additive and use the appropriate equipment to perform a thorough complete flush, then let it drain. Suck out all remaining fluid in the transmission for a perfect clean.

Screw the oil plug back under the pan, replacing the gasket, lower the vehicle, and refill with the correct amount of the appropriate oil. Perform a road test with the vehicle to verify if the automatic transmission issues have been resolved.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

BMW X5 (2007-2013 / E70) This guide shows how to replace the automatic shift lever on the BMW X5 E70. The first step is to remove the trim plate around the shifter using a pl…
BMW X5 (1999-2006 / E53) If you notice difficulty in the gear shifting sequence with the vehicle's automatic transmission, you can attempt to reset it using a specific proced…
BMW X5 (2013-2018 / F15) In this tutorial, you will see how to unlock the automatic transmission in a BMW X5. This is a simple operation to perform in order to shift into neu…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos