Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Service on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Service warning light

In this tutorial, you will see how to reset the brake service on a BMW 3 Series, a very simple and quick operation to perform only after completing the required scheduled maintenance. Start by entering the cabin, then insert the key and turn on the ignition. Next, press and hold the left button on the dashboard to activate the maintenance menu. Scroll through the available services and, when you reach the brake service, reset it by pressing the button again. Restart the vehicle to verify that the procedure was successful.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Service on a BMW 3 Series?
How to Reset the Brake Service on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) .. In this tutorial, you will learn how to reset the brake service on a BMW 3 Series, a very simple and quick operation to perform only after.. …
How to reset the brake service in the BMW 3 Series?
How to reset the brake service in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial we can see how to reset the brake service in the BMW 3 Series, an extremely simple and quick operation, to be carried out only once …
How to reset the brake service in the BMW 3 Series?
How to reset the brake service in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, we can see how to reset the brake service in the BMW 3 Series, an extremely simple and quick operation, to be carried out only once…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos