Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Window Regulator Motor

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Power window motor

After removing the door panel, secure the window in the closed position, meaning the glass must be all the way up. Remove the entire assembly that allows the window to move, then insert the new assembly in the same position as the old one. Now, start securing it with the bolts for each necessary hole to hold it in place. Next, connect the various required connectors and perform a few tests before closing the panel again. If everything works correctly and there are no issues, you can proceed to close the door panel.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Window Regulator Motor Replacement
Window Regulator Motor Replacement
BMW Serie 5 (1995-2003 / E39) Unscrew the screws located on the side of the door and on the armrest. Remove the panel by prying with a screwdriver on the various plastic clips, th…
Instructions for Disassembling the Power Window Mechanism
Instructions for Disassembling the Power Window Mechanism
BMW Serie 5 (1995-2003 / E39) To disassemble the complete power window mechanism with motor, first remove the door panel. Before disconnecting the window switch connector, lower t…
Window Regulator Operation with Door Removed Using Battery
Window Regulator Operation with Door Removed Using Battery
BMW Serie 5 (1995-2003 / E39) If you need to perform bodywork tasks such as replacing window seals or checking the operation of the lock or power windows on a removed door, it wil…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos