Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Regulator Operation with Door Removed Using Battery

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Power window motor

See other generations:
Video tutorial

If you need to perform bodywork tasks such as replacing window seals or checking the operation of the lock or power windows on a removed door, it will be difficult, if not impossible, to raise or lower the window since the door is disconnected from the vehicle's electrical system.

In this case, a standard car battery can be helpful.

By connecting the window regulator motor to the battery, you can see and understand that by reversing the wires, you will make the motor turn in one direction or the other, allowing you to raise or lower the window. If you need to work on the rear pillar seals, you will need to fully lower the window.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Installing the Window Regulator Motor
Installing the Window Regulator Motor
BMW Serie 5 (1995-2003 / E39) After removing the door panel, secure the window in the closed position, meaning the glass must be all the way up. Remove the entire assembly that al…
How to Install Interior Trim Near the Window
How to Install Interior Trim Near the Window
BMW Serie 5 (1995-2003 / E39) If you want to replace the interior trim of your BMW 5 Series, you must first deal with the panel located at the top of the door. It is attached with…
How to Reset the Window Regulator of the BMW 5 Series?
How to Reset the Window Regulator of the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) To reset the window regulator of the BMW 5 Series, fully lower the window you want to reset. Once it is completely down, press and hold the button do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos