Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil indicator light on the BMW X5 G05

Model: BMW X5 G05, G18 - Years 2019-2026
Part: Service warning light

If you own a BMW X5 G05 and want to find out the steps to follow to complete the manual reset procedure for the engine oil light, then all you have to do is read the following guide carefully. First, get into the car and start the instrument panel in diagnostic mode by pressing the ignition button three times in a row. Then, locate the "BC" button at the end of the left steering wheel lever and hold it down for about 12 seconds. Release it immediately and repeat the same procedure two more times to complete the oil light reset.

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the BMW X5 G05
How to Reset the Oil Light on the BMW X5 G05
BMW X5 (2019-2026 / G05, G18) If you own a BMW X5 G05 (2019-2023) and want to learn how to correctly reset the engine oil light after changing the oil, just carefully read the fol…
Where are the fuses located in the BMW X5 G05?
Where are the fuses located in the BMW X5 G05?
BMW X5 (2019-2026 / G05, G18) In this new guide aimed at all of you who own a BMW X5 G05, we will discover where the fuses are located. This way, you will have the possibility to …
How to Reset the Service Light on the BMW X5 G05
How to Reset the Service Light on the BMW X5 G05
BMW X5 (2019-2026 / G05, G18) This guide describes all the steps needed to manually reset the service light on your BMW X5 G05. First, insert the key and press the ignition button…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos