Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the right front headlight bulb on the BMW 1 Series model E87 is a very simple task that can be done independently, thanks to our tutorial. To replace the bulb, open the bonnet and then open the cover of the light unit located at the back of the headlight.

Once the cover is removed, disconnect the electrical connector of the bulb and also extract the bulb from inside. Insert the new bulb, reconnect the connector, close the cover, and then close the bonnet to test the bulb's operation.

The same steps can be followed to replace the other bulbs.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb on the BMW 1 Series?
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To replace the headlight bulb on the BMW 1 Series, remove the inner cover of the wheel arch corresponding to the headlight containing the bulb to be …
How to Replace the Front Headlight Bulb of the BMW 1 Series?
How to Replace the Front Headlight Bulb of the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The following video tutorial shows how easy and quick it is to replace the front headlight bulb of the BMW 1 Series by yourself. Open the front bonne…
Replacing the Front Headlamp Bulb on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, you will learn how to remove and replace the front headlamp bulb on the BMW 1 Series. First, lift the bonnet of your car and start by removing…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos