Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of a BMW 3 Series?

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Seat

See other generations:
Video tutorial

To remove the front seat of a BMW 3 Series, start by disconnecting the vehicle's battery to avoid issues with the airbags and electrical components. Move the seat all the way back to access the front mounting bolts at the base of the seat.

Use an appropriate wrench to remove these bolts. Then, move the seat all the way forward to access the rear bolts and remove them in the same manner.

Once all the mounting bolts are removed, carefully lift the seat to avoid damaging the connected wires. Under the seat, disconnect the electrical connectors that link the seat to the vehicle's system.

Lift the seat out of the car, being careful not to scratch the body or interior. The front seat is now completely removed, and you can proceed with any necessary maintenance or replacement.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat of the BMW 3 Series
How to Remove the Front Seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide shows you how to remove and replace the front seat of the BMW 3 Series, following the instructions below. First, open the front door and s…
How to disassemble the front seat of the BMW 3 Series
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the instructions that will allow us to disassemble and eventually replace the front seat of the BMW 3 Series. First, we op…
Removing BMW 3 Series Seat
Removing BMW 3 Series Seat
BMW Serie 3 (1998-2006 / E46) Is the seat of your BMW 3 Series due for replacement? Here’s how to remove the front seat. Move the seat back (press the electric buttons) and raise …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos