Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you clean the interior of the BMW 5 Series headlight?

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Headlight

In order to clean the inside of the BMW 5 Series headlight, it is obviously necessary for the headlight in question to be removed from its housing: to do this, the screws that hold it in place must be unscrewed and then the connector on the inside must be disconnected. Once the headlight has been removed from its seat, two magnets can be used, covering them with a microfiber cloth: one magnet must be inserted inside the headlight from the back, removing a bulb. Now, using the external magnet, it will be possible to polish the headlight from the inside as well, moving the external magnet.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Lens on the BMW 5 Series
Replacing the Front Headlight Lens on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) This guide shows how to remove and replace the plastic lens of the front headlight on the BMW 5 Series, following the instructions below. First, remo…
Replacing the Headlight and Tail Lights on a BMW 5 Series
Replacing the Headlight and Tail Lights on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this guide, you will learn the steps to remove and replace the rear headlight and its bulbs on a BMW 5 Series. First, open the trunk and start rem…
How to Replace the Interior Handle on a BMW 5 Series?
How to Replace the Interior Handle on a BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To replace the interior handle on a BMW 5 Series, you need to completely remove the corresponding door panel: to do this, you must detach the cover l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos