Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Center console tunnel

Watch this video to learn how to disassemble and remove the glove compartment from the center console trim of a BMW 3 Series. Position the gear shift knob vertically, then use a plastic trim tool to remove the leather boot from the gear shift lever. Next, use the trim tool to pry at the edge of the center dashboard. Once the trim is removed, disconnect all the electrical connectors. Use a screwdriver to remove the glove compartment from the previously removed trim. Install the new piece onto the trim and proceed with reassembly in reverse order.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the console and central tunnel of the BMW 3 Series
How to disassemble the console and central tunnel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below we will discover the information that will allow us to dismantle and replace the tunnel and central console of the BMW 3 Series. First, we get …
Removing the Center Console of BMW E46
Removing the Center Console of BMW E46
BMW Serie 3 (1998-2006 / E46) Want to remove the pieces of the center console from a BMW 3 Series? Let's see how to disassemble it. Position the gear shift knob vertically (remove…
How to Remove the Center Console Trim Panel on a BMW 3 Series
How to Remove the Center Console Trim Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to remove the center console trim panel on a BMW 3 Series. Position the gear shift knob vertically, then use a plastic pry tool to remo…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos