Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Left Windshield of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Windshield

Want to install the left front windshield of a BMW 3 Series? Here's how to proceed. First, use a plastic trim tool to remove the molding on the left door. Start unscrewing the screws under the handle with a screwdriver, then pull them out with pliers. Detach the door panel from the door using the trim tool, then disconnect the window and speaker controls. Remove the adhesive glass protector panel, unscrew the glass from the track and the window regulator. Slide the windshield out by hand, moving it out of the door track. Reverse the assembly of the parts as you disassembled them earlier.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Side Window of the BMW 3 Series
Removing the Rear Side Window of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide briefly outlines the steps necessary to remove and replace the rear side window of the BMW 3 Series. First, open the rear door and begin r…
How to Reset the Window Switch on a BMW 3 Series?
How to Reset the Window Switch on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the window switch on a BMW 3 Series, fully raise the window until it reaches the highest position. Next, disconnect the connector located in…
Removing the Window Regulator Motor on a BMW 3 Series
Removing the Window Regulator Motor on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the window regulator motor from a BMW 3 Series? Let's see how to proceed in this video. Disconnect the battery terminals. Use a screwdr…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos