Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : How to replace the fog lights in a BMW 325Ci

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Fog lights
Operation: How to replace the fog lights in a BMW 325Ci

To replace a fog light in a BMW 325Ci it is sufficient to perform a mere replacement operation. It will therefore be necessary to procure a suitable lighthouse to take the place of the deteriorated one; It is also advisable to use a Allen key, which is useful for removing the supports inserted in the car. In fact, it is necessary to raise the car and operate near the lower-side wall, with respect to the fog light to be replaced. Right in the corner between the wheel and the bumper you can see a lid to open; from there it is possible to first remove the old lighting body and then insert the new one.


Posted on 1 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos