Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fog Light Bulbs on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

Let's see how to replace the fog light bulbs on a BMW 3 Series: start by removing the plastic cover at the bottom of the fender (plastic splash shield) using a suitable screwdriver; access the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and install a new one (same size and voltage).

Reattach the plastic cover under the car's fender with the attached clips. Test the lights to ensure they work properly.

Perform this replacement on the front and rear lights to maintain consistent illumination.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulbs on a BMW 3 Series
How to Replace the Brake Light Bulbs on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In today's tutorial video, we will show you how to remove and replace the bulbs of the rear light or brake light on a BMW 3 Series by following these…
Remove Fog Light Bulb on BMW 3 Series
Remove Fog Light Bulb on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the fog light bulbs? Let's see how to remove the fog light bulbs on the BMW 3 Series. Turn the front wheel inward, locate the fender liner cov…
How to Replace the Headlight Bulbs on a BMW 3 Series
How to Replace the Headlight Bulbs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to replace the headlight bulbs on a BMW 3 Series. Start by using a screwdriver to open the cover located in the plastic splash shield o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos