Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the coolant level of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

Today's instructions will show us how to check the coolant level of the BMW 3 Series. First, we open the hood of the car and locate the coolant reservoir; on the side of it there are markings that indicate both the maximum and minimum levels, as shown in the video. If the coolant level is at or below the minimum level, it will be necessary to unscrew the cap and top up with the same type of fluid, bringing the level to the maximum mark!

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Coolant Level in a BMW 3 Series
How to Check the Coolant Level in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to check the coolant or antifreeze level in a BMW 3 Series, and how to top it off if necessary. First, …
How to top up the coolant on a BMW 3 Series?
How to top up the coolant on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To top up the coolant on a BMW 3 Series, follow these steps. Make sure the engine is cool before proceeding. Open the hood and locate the coolant res…
How to replace the coolant reservoir in the BMW 3 Series?
How to replace the coolant reservoir in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial we can see how to replace the coolant reservoir in the BMW 3 Series, a very simple operation. First of all, we wait for the engine t…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos