Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time in the BMW X1?

Model: BMW X1 E84 - Years 2009-2015
Part: Clock

In this tutorial we can see how to adjust the time in the BMW X1, a very simple and quick operation, to be carried out for example after changing the time or after replacing the battery. First of all, let's go inside the car, then insert the key and turn on the instrument panel. Then scroll through the display options using the directional arrows on the left control lever, reach the clock and activate the adjustment by pressing the "BC" button. To adjust the hour and minutes, simply use the directional arrows, and to save the setting, simply press the "BC" button again.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time in the BMW X1?
How to adjust the time in the BMW X1?
BMW X1 (2009-2015 / E84) .. In this tutorial, we can see how to adjust the time in the BMW X1, an extremely simple and quick operation, to be carried out for.. …
How to set the time on the BMW X1
How to set the time on the BMW X1
BMW X1 (2015-2022 / F48) Today's steps will show us how to adjust the date and time of the BMW X1, following the instructions below. First, we get into the car and start the …
How to adjust the seat of the BMW X1
How to adjust the seat of the BMW X1
BMW X1 (2015-2022 / F48) In this short video tutorial, it is explained how to manually adjust the front seat of the BMW X1. The procedure is simple and no tools are needed to…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos