Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sunroof in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the sunroof in the BMW 3 Series, a very simple and quick operation to perform, for example, if you need to replace the shade or the glass. First, lift the sunroof, then open the shade and detach the two side covers.

Next, unscrew the screws you just exposed, separate the glass from the base, and continue by detaching the shade from its supports using a hook. Finally, clean any dirt in the housing, install any replacement parts, and reassemble everything.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Manually Open and Close the BMW 3 Series Convertible Top
How to Manually Open and Close the BMW 3 Series Convertible Top
BMW Serie 3 (1990-2001 / E36) This guide provides instructions to manually open and close the convertible top of the BMW 3 Series. First, open the trunk lid and begin to manually …
How to Replace the Sunroof on a BMW 3 Series?
How to Replace the Sunroof on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the sunroof on a BMW 3 Series, you need to remove the headliner from inside the cabin. First, disconnect the courtesy light assembly and r…
How to Synchronize and Reset the BMW 3 Series Convertible Top
How to Synchronize and Reset the BMW 3 Series Convertible Top
BMW Serie 3 (1990-2001 / E36) This guide provides instructions to reset and synchronize the convertible top of the BMW 3 Series, following these simple steps. First, open the trun…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos