Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sunroof in the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

In this tutorial we can see how to replace the sunroof in the BMW 3 Series, an extremely simple and fast operation. First of all, let's go inside the cabin, then open both the sunshade and the sunroof itself. Next, we unclip both side covers, unscrew the bolts just released using a Torx T25 key and remove the glass from the supports. We then close the sunshade, go outside the vehicle and unhook it from the respective slides. At this point, all that remains is to position the spare parts and assemble them simply by following the reverse procedure.

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Headliner of the BMW 3 Series
Removing the Headliner of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Follow these step-by-step instructions to remove and replace the headliner of the BMW 3 Series. First, get inside the cabin and start by removing the…
How to disassemble the sunroof in the BMW 3 Series?
How to disassemble the sunroof in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial we can see how to disassemble the sunroof in the BMW 3 Series, an extremely simple and quick operation, to be carried out for exampl…
How to reset the sunroof motor of the BMW Series 3.
How to reset the sunroof motor of the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) Following these brief and simple instructions, we will see how to reset and calibrate the motor of the opening panoramic roof of the BMW Series 3. Fi…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos