Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Escalade
    4. : How to replace the cabin filter on a Cadillac Escalade.

Cadillac Escalade - Video tutorial

Model: Cadillac Escalade Gmtk2xl - Years 2015-2020
Part: Cabin air filter
Operation: How to replace the cabin filter on a Cadillac Escalade.

In this video tutorial we can see how to replace the cabin filter on a Cadillac Escalade, following a few simple steps: the first thing to do is to purchase a new pollen filter; the next step is to get into the car and turn off the engine, pull the handbrake. The cabin filter on this car can be found behind the glove compartment, so in order to access it, we need to remove the glove compartment. We start by removing all the objects inside the glove compartment. Using a 15 torx key, we remove the 4 fixing screws of the compartment (the first two screws are located under the glove compartment), to reach the other two screws we need to open the glove compartment. Now we can remove the glove compartment and have access to the cabin filter box. Remove the cover of the box and then remove the old filter and replace it with the new one following the arrow directions.


Posted on 25 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos