Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Where is the Chevrolet Matiz fuse box located

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Fuse box
Operation: Where is the Chevrolet Matiz fuse box located

If any electrical device on board the car does not activate, the first thing to check is the integrity of the relative protection fuse; the fuse box of this car model is located inside the engine compartment, practically immediately behind the left headlight (driver's side): once the position of the box has been intercepted, remove the cover inside which the legend that associates the position of each fuse with the relative protected device; if you want to investigate further, a diagnostic check can be carried out using the specific diagnostic socket located on the passenger side, immediately under the glove compartment.


Posted on 5 October 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Matiz 1998-2010 - Where are the fuses located on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the cigarette lighter fuse on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where are the fuse boxes located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - How do you replace a Chevrolet Matiz fuse? Read Answer
    • Matiz 1998-2010 - Where are the Chevrolet Matiz fuses located? Read Answer
    • Matiz 1998-2010 - Where is the fuse box located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the Chevrolet Matiz fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos